Custom Wood Creations
Using a template, the plug holes are marked on both sides of the mitered corners. |
The plug holes are marked centering the board. (1" board = marked 1/2" from edge.) |
Marked on both sides of the mitered corners. |
Using a 3/8" spade bit, drill the plug holes approximately 1/2" deep, then drill pilot holes. |
Screw together only on the long sides of the box while clamped. Leave the other holes blank. |
Plug all the holes except for the ones on the bottom of the case. We have to install the glass yet. |
Allen-Hofh custom guitars | BACK ONE PAGE |