Custom Wood Creations
Now we'll check the slot with a piece of glass. Perfect fit: slight movement, not sloppy. |
Using a 3/8" rabbitting bit in our router table, we'll cut a stepped rabbit on the same face as the... |
...glass dado. This will be the inside of the display case. |
The stepped-rabbit will hold the backing material, and then the actual back of the case. |
You can see that I've put a profile both edges of the front. A small cove on the inside edge.. |
...and a roman ogee on the outside edge. The profile is bigger on the outside. |
Allen-Hofh custom guitars | BACK ONE PAGE |
|